LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2014 >> QX60 Base, FWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Door & Lock (Except Hybrid) >> DTC/Circuit Diagnosis >> Automatic Back Door Main Switch >> Component Function Check

Component Function Check

  1. CHECK FUNCTION 
    1. Select AUTOMATIC BACK DOOR CONTROL MODULE using CONSULT.
    2. Select MAIN SW in DATA MONITOR mode.
    3. Check that the function operates normally according to the following conditions.
      Monitor item Condition Status
      MAIN SW Automatic back door main switch ON ON
      OFF OFF

      Is the inspection result normal? 

      YES: Automatic back door main switch is OK.

      NO: Refer to "DIAGNOSIS PROCEDURE ".

scientia non olet · About LEMON Manuals