LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2014 >> QX60 Base, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Exterior Lighting System (Except Hybrid) >> DTC/Circuit Diagnosis >> Hazard Switch >> Component Function Check

Component Function Check

  1. CHECK HAZARD SWITCH SIGNAL BY CONSULT 

    CONSULT DATA MONITOR

    1. Turn ignition switch ON.
    2. Select HAZARD SW of BCM (FLASHER) DATA MONITOR item.
    3. While operating the hazard switch, check the monitor status.
      Monitor item Condition Monitor status
      HAZARD SW Hazard switch ON On
      OFF Off

      Is the inspection result normal? 

      YES: Hazard switch circuit is normal.

      NO: Refer to "DIAGNOSIS PROCEDURE ".

scientia non olet · About LEMON Manuals