Display And Warning Operation
| Vehicle condition/Driver's operation | Action | ||||
|---|---|---|---|---|---|
| Warning systems ON indicator | Vehicle speed (Approx.) [km/h (MPH)] | Turn signal condition | Status of vehicle detection within detection area | Indication on the Blind Spot Warning/Blind Spot Intervention indicator | Buzzer |
| OFF | - | - | - | OFF | OFF |
| ON | Less than approx. 29 (18) | - | - | OFF | OFF |
| Approx. 32 (20) or more | - | Vehicle is absent | OFF | OFF | |
| OFF | Vehicle is detected | ON | OFF | ||
| ON (vehicle detected direction) | Before turn signal operates Vehicle is detected | Blink | Short continuous beep | ||
| Vehicle is detected after turn signal operates | Blink | OFF | |||
NOTE:
- If vehicle speed exceeds approximately 32 km/h (20 MPH), BSW function operates until the vehicle speed becomes lower than approximately 29 km/h (18 MPH).
- Time shown in the figure is approximate time.
- Always Blind Spot Intervention system operates together with BSW system. Whenever Blind Spot Intervention system is turned on by pushing the dynamic driver assistance switch, BSW system also be turned on even if the BSW system is turned off. However, at this time the warning systems ON indicator remains OFF.