Removal and Installation: Removal

Remove the instrument lower panel LH. Refer to "REMOVAL AND INSTALLATION ".
Remove three screws (A, B) that retain the lower switch carrier (2).
1. Upper switch carrier
2. Upper switch carrier screws
  
  Fig 1: Identifying Upper Switch Carrier And Mounting Screws
  Courtesy of NISSAN NORTH AMERICA, INC.
Release upper (B) and lower (C) tab using a suitable tool (A), then remove the warning system switch (1) from the lower switch carrier.

(2): Headlamp aiming switch
(3): AC 120V outlet main switch (if equipped)
(4): Heated steering wheel switch

Fig 2: Identifying Heated Steering Wheel Switch, AC 120V Outlet Main Switch And Headlamp Aiming Switch
Courtesy of NISSAN NORTH AMERICA, INC.