LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2014 >> QX60 Base, FWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Driver Assistance System (Blind Spot Warning & Blind Spot Intervention) (Except Hybrid) >> DTC/Circuit Diagnosis >> DTC U1010: Control Unit (Can) >> Lane Camera Unit >> LANE CAMERA UNIT: Diagnosis Procedure

LANE CAMERA UNIT: Diagnosis Procedure

  1. PERFORM DTC CONFIRMATION PROCEDURE 
    1. Turn the Blind Spot Intervention system ON.
    2. Perform "All DTC Reading" with CONSULT.
    3. Check if the "U1010" is detected as the current malfunction in "Self Diagnostic Result" of "LANE CAMERA".

    Is "U1010" detected as the current malfunction? 

    YES: Replace the lane camera unit. Refer to "REMOVAL AND INSTALLATION ".

    NO: INSPECTION END