LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2014 >> QX60 Base, FWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Driver Assistance System (Blind Spot Warning & Blind Spot Intervention) (Except Hybrid) >> DTC/Circuit Diagnosis >> DTC U0104: ADAS Can 1 >> Side Radar >> SIDE RADAR: DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

  1. PERFORM DTC CONFIRMATION PROCEDURE 
    1. Start the engine.
    2. Turn the Blind Spot Intervention system ON.
    3. Perform "All DTC Reading" with CONSULT
    4. Check if the U0104 is detected as the current malfunction in "Self Diagnostic Result" of "SIDE RADAR RIGHT/LEFT".

    Is the DTC "U0104" detected? 

    YES: Refer to "SIDE RADAR: DIAGNOSIS PROCEDURE ".

    NO: Refer to "INTERMITTENT INCIDENT ".

scientia non olet · About LEMON Manuals