LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2014 >> QX60 Base, FWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Driver Assistance System (Blind Spot Warning & Blind Spot Intervention) (Except Hybrid) >> DTC/Circuit Diagnosis >> DTC C1B01: Cam Aiming INCMP >> ADAS Control Unit >> ADAS CONTROL UNIT: Diagnosis Procedure

ADAS CONTROL UNIT: Diagnosis Procedure

  1. CHECK SELF-DIAGNOSIS RESULTS 

    Check if "C1B01" is detected in "Self Diagnostic Result" of "LANE CAMERA".

    Is "C1B01" detected? 

    YES: Refer to "LANE CAMERA UNIT: DTC LOGIC "

    NO: GO TO  2.

  2. CHECK DATA MONITOR 
    1. Start the engine.
    2. Check that "OK" is indicated for the value of "AIMING RESULT" in "DATA MONITOR" of "LANE CAMERA".

    Is "OK" indicated? 

    YES: Replace the ADAS control unit. Refer to "REMOVAL AND INSTALLATION ".

    NO: Replace the lane camera unit. Refer to "REMOVAL AND INSTALLATION ".

scientia non olet · About LEMON Manuals