LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2014 >> QX60 Base, FWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Driver Assistance System (Blind Spot Warning & Blind Spot Intervention) (Except Hybrid) >> DTC/Circuit Diagnosis >> DTC C1A06: Operation SW >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

  1. PERFORM DTC CONFIRMATION PROCEDURE 
    1. Start the engine.
    2. Wait for approximately 5 minutes after turning the LDP system ON.
    3. Perform "All DTC Reading" with CONSULT.
    4. Check if the "C1A06" is detected as the current malfunction in "Self Diagnostic Result" of "ICC/ADAS".

    Is "C1A06" detected as the current malfunction? 

    YES: Refer to "DIAGNOSIS PROCEDURE ".

    NO: Refer to "INTERMITTENT INCIDENT ".

scientia non olet · About LEMON Manuals