Removal and Installation: Installation

WARNING: This page is about a different car, the 2013 Infiniti FX50. However, it is still accessible from the selected car via links, so may be relevant.

Note the following, and install in the reverse order of removal.

CAUTION: Apply multi-purpose grease on the pin surface (that slides after installing a collar) of the pivot pin.

Refer to the followings when installing selector lever knob to A/T shift selector assembly.
1. Insert lock pin to selector lever knob.
2. Install selector lever knob over selector lever until a click is felt.
  CAUTION:
  - Install it straight, and never tap or apply any shock to install it.
  - Never push selector button.
When installing control rod to A/T shift selector assembly, refer to "ADJUSTMENT ". Refer to "INSPECTION AND ADJUSTMENT ".