LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2013 >> FX37 Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Automatic Transmission) >> Periodic Maintenance >> A/T Position >> Inspection and Adjustment >> Adjustment

Inspection and Adjustment: Adjustment

WARNING: This page is about a different car, the 2013 Infiniti FX50. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen nut (←).
    Fig 1: Locating Lower Lever And Nut
    G09002214Courtesy of NISSAN NORTH AMERICA, INC.
  2. Place manual lever and selector lever in "P" position.
  3. While pressing lower lever (A) toward rear of vehicle (in "P" position direction), tighten nut to specified torque. Refer to "EXPLODED VIEW ".
CAUTION: Be careful not to touch the control rod while pressing lower lever of A/T shift selector assembly.
NOTE: Press lower lever of A/T shift selector assembly with a force of approximately 1 kg (9.8 N).
scientia non olet · About LEMON Manuals