LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2013 >> FX37 Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Engine Mechanical) >> Unit Disassembly And Assembly >> How To Select Piston And Bearing >> Connecting Rod Bearing >> When Connecting Rod And Crankshaft Are Reused

When Connecting Rod And Crankshaft Are Reused

WARNING: This page is about a different car, the 2013 Infiniti FX50. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measure connecting rod big end diameter and crankshaft pin journal diameter. Refer to "INSPECTION ".
  2. Correspond the measured dimension in connecting rod big end diameter row of "CONNECTING ROD BEARING SELECTION TABLE ".
  3. Correspond the measured dimension in crankshaft pin journal diameter column of "CONNECTING ROD BEARING SELECTION TABLE ".
  4. Follow from step 3 in "WHEN NEW CONNECTING ROD AND CRANKSHAFT ARE USED ".
scientia non olet · About LEMON Manuals