LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2011 >> QX56 RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Transfer Case (ATX90A)) >> Unit Removal And Installation >> Input Oil Seal >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove transfer assembly from vehicle. Refer to "EXPLODED VIEW ".
  2. Remove input oil seal from front case, using a suitable tool.
    CAUTION: Never damage the front case and input.
scientia non olet · About LEMON Manuals