LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2011 >> G37 IPL, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 63 (Front Axle (AWD) -- G37 Coupe) >> Removal And Installation >> Front Wheel Hub And Knuckle >> Inspection >> Inspection After Installation

Inspection After Installation

WARNING: This page is about a different variant/trim than selected.
  1. Check the wheel sensor harness for proper connection. Refer to "EXPLODED VIEW ".
  2. Check the wheel alignment. Refer to "INSPECTION ".
  3. Adjust neutral position of steering angle sensor. Refer to "ADJUSTMENT OF STEERING ANGLE SENSOR NEUTRAL POSITION : SPECIAL REPAIR REQUIREMENT ".
scientia non olet · About LEMON Manuals