Diagnosis Procedure
- COMBINATION SWITCH INSPECTION
Check the combination switch. Refer to "SYMPTOM TABLE ".
Is the combination switch normal?
YES: GO TO 2.
NO: Repair or replace the malfunctioning part.
- CHECK HEADLAMP (LO) REQUEST SIGNAL INPUT
CONSULT-III DATA MONITOR
- HEADLAMP (LO) CIRCUIT INSPECTION
Check the headlamp (LO) circuit. Refer to HEADLAMP (LO) CIRCUIT .
Is the headlamp (LO) circuit normal?
YES: Replace IPDM E/R.
NO: Repair or replace the malfunctioning part.