Diagnosis Procedure

Check the combination switch. Refer to "SYMPTOM TABLE ".

Is the combination switch normal? 

YES: GO TO 2.

NO: Repair or replace the malfunctioning part.

CONSULT-III DATA MONITOR

1. Select "FR FOG REQ" of IPDM E/R data monitor item.
2. With operating the front fog lamp switch, check the monitor status.
   CONDITION REFERENCE CHART
   
   

   Monitor item	Condition		Monitor status
   FR FOG REQ	Front fog lamp switch (Lighting switch 2ND)	ON	On
   		OFF	Off

   Is the item status normal? 

   YES: GO TO 3.

   NO: Replace BCM.

Check the front fog lamp circuit. Refer to FRONT FOG LAMP CIRCUIT .

Is the front fog lamp circuit normal? 

YES: Replace IPDM E/R.

NO: Repair or replace the malfunctioning part.