LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2011 >> G37 IPL, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Exterior Lighting System -- G37 Coupe >> DTC/Circuit Diagnosis >> Hazard Switch >> Component Function Check

Component Function Check

  1. CHECK HAZARD SWITCH SIGNAL BY CONSULT-III

    CONSULT-III DATA MONITOR

    1. Turn the ignition switch ON.
    2. Select "HAZARD SW" of BCM (FLASHER) data monitor item.
    3. With operating the hazard switch, check the monitor status.
      CONDITION REFERENCE CHART

      Monitor item Condition Monitor status
      HAZARD SW Hazard switch While pressing the switch On
      While not pressing the switch Off

      Is the item status normal? 

      YES: Hazard switch circuit is normal.

      NO: Refer to "DIAGNOSIS PROCEDURE ".

scientia non olet · About LEMON Manuals