How To Perform Trouble Diagnosis
- Check the symptom and customer complaint.
- Understand the outline of system. Refer to "SYSTEM DESCRIPTION ".
- Perform the preliminary inspection. Refer to "PRELIMINARY INSPECTION ".
- Referring to symptom chart, repair or replace the cause of the malfunction. Refer to "SYMPTOM CHART ".
- Erase DTC and perform self-diagnosis of LDW system again. Then perform LDW system running test. Refer to "CONSULT-II Function (LDW) " and "LDW SYSTEM RUNNING TEST ".
- Does LDW system operate normally? If it operates normally, GO TO 7. If not, GO TO 3.
- INSPECTION END