Preliminary Inspection

Are camera lens and windshield contaminated with foreign materials? 

YES : Clean camera lens and windshield.

NO : GO TO 2.

Check camera unit installation condition (installation position, properly tightened, a bent bracket).

OK or NG 

OK : GO TO 3.

NG : Install camera unit properly, and adjust camera aiming. Refer to "CAMERA AIMING ADJUSTMENT ".

Check vehicle height. Refer to "DIMENSIONS ".

Is vehicle height appropriate? 

OK : GO TO 4.

NG : Repair vehicle to appropriate height.

Perform self-diagnosis of LDW camera unit. Refer to "CONSULT-II Function (LDW) ".

Self-diagnosis results 

1. No malfunction detected : GO TO 5.
2. Malfunction detected : Check applicable parts, and repair or replace corresponding parts.

Check combination meter function.

Do speedometer and turn signal indicator normal function? 

YES : INSPECTION END

NO : Check combination meter. Refer to "TROUBLE DIAGNOSIS ".