LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2006 >> FX35 RWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Exterior Lights >> Lighting System >> Hazard Switch >> Removal and Installation >> Removal

Removal and Installation: Removal

  1. Remove A/T console finisher. Refer to "INSTRUMENT PANEL ASSEMBLY ".
  2. Disconnect the hazard switch connector.
  3. Remove the drink holder.
  4. Press pawl on reverse side and remove hazard switch.
    Fig 1: Identifying Drink Holder
    G04078280Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals