Work Step

When removing instrument panel and pad, combination meter, audio and display, NAVI control unit and center console, take steps in the order shown by the numbers below.

REMOVAL AND INSTALLATION WORK STEP

	Parts	Reference	Instrument panel & pad	Cluster lid C	Cluster lid A	Center console assembly	Glove box assembly	Center box assembly
A	Selector knob (A/T models)		1	1		1		1
B	Shift knob (M/T models)		1	1		1		1
C	Console finisher (A/T models)	REMOVAL	2	2		2		2
D	Console boot (M/T models)	REMOVAL	2	2		2		2
E	Cluster lid C side finisher (RH/LH)	REMOVAL	3	3		3		3
F	Cluster lid finisher upper	REMOVAL	4	4
G	Cluster lid finisher lower	REMOVAL	5	5
H	Instrument finisher B	REMOVAL	6	6				4
I	Cluster lid C side finisher (RH/LH)	REMOVAL	7	7
J	Instrument lower driver panel	REMOVAL	8		1
K	Steering column covers	REMOVAL	9		2
L	Ligting & turn signal switch	, "LIGHTING AND TURN SIGNAL SWITCH "	10		3
M	Wiper & washer switch		11		4
N	Knee protector lower	REMOVAL	12		5
O	Steering lock escutcheon	REMOVAL	13		6
P	Cluster lid A	REMOVAL	14		7
Q	Front kicking plate(RH/LH)		15				1	5
R	Dush side finisher(RH/LH)		16				2	6
S	Instrument lower cover	REMOVAL	17				3	7
T	Glove box assembly	REMOVAL	18				4	8
U	Instrument side panel (RH/LH)	REMOVAL	19					9
V	Center box assembly	REMOVAL	20					10
W	NAVI control unit		21
X	Passenger air bag module		22
Y	Center console assembly	REMOVAL	23
Z	Display unit &amplifier		24
Aa	Front defroster grille (RH/LH)		25
Ab	Side vetilator grille (LH)		26
Ac	Center ventilator grille (LH)		27
Ad	Front pillar garnish		28
Ae	Instrument panel & pad	REMOVAL	29