Gauge Resistance
Remove combination meter (instrument cluster). See COMBINATION METER under REMOVAL & INSTALLATION. Measure resistance between appropriate gauge screws on back of combination meter. See Fig 1 . See METER/GAUGE RESISTANCE table. If resistance readings are not as specified, replace appropriate gauge.
METER/GAUGE RESISTANCE
| Gauge Screws | Ohms | |
|---|---|---|
| Coolant Temperature & Fuel Gauges | ||
| "A" & "C" | 70-140 | |
| "B" & "C" | 90-170 | |
| Tachometer | ||
| "A" & "C" | 70-140 | |
| "B" & "D" | 90-170 | |