LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Veloster 2.0, Standard Trans >> Repair and Diagnosis (Single Page) >> Brakes >> Anti-Lock Brakes >> Antilock Brake System (Abs)/Electronic Stability Control (ESC) Diagnosis >> DTC C1643-08: CAN Time-Out Yaw Rate & G Sensor >> Wiring Inspection >> Terminal and Connector Inspection

Terminal and Connector Inspection

  1. Many malfunctions in the electrical system are caused by poor harness and terminals. Faults can also be caused by interference by other electrical systems, and mechanical or chemical damage.
  2. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage.
  3. Did you find a cause?

    YES 

    NO 

    • Go to next procedure.
scientia non olet · About LEMON Manuals