LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Veloster 2.0, Standard Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System (Abs)/Electronic Stability Control (ESC) Diagnosis >> DTC C1643-08: CAN Time-Out Yaw Rate & G Sensor >> Verification Of Repair >> Verification of Vehicle Repair

Verification of Vehicle Repair

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect the GDS and select the "Diagnostic Trouble Codes (DTC)" mode.
  2. Erase the DTCs and test the vehicle according to the DTC Setting Condition in DTC Information.
  3. Did the same DTC return?

    YES 

    • Go to the applicable troubleshooting procedure.

    NO 

    • The system is running properly in line with the specifications at this time.
scientia non olet · About LEMON Manuals