LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Veloster 2.0, Standard Trans >> Repair and Diagnosis (Single Page) >> Brakes >> Anti-Lock Brakes >> Antilock Brake System (Abs)/Electronic Stability Control (ESC) Diagnosis >> DTC C1643-08: CAN Time-Out Yaw Rate & G Sensor >> Wiring Inspection >> CAN Bus line Inspection

CAN Bus line Inspection

Item Normal Value Prerequisite Condition Probe (+) Probe (-)
CAN Bus line (open): resistance Approx. below 1Ω
  1. Ignition switch: OFF
  2. ESP, SRSCM connector: Disconnected
ESP CAN High terminal SRSCM CAN High terminal
ESP CAN Low terminal SRSCM CAN High terminal
  1. Is the result within specifications?

    YES 

    • Go to next procedure.

    NO 

    • Repair open in CAN BUS line between ESP (ESC) harness connector and SRSCM harness connector and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.