Charging System Inspection
| Item | Normal Value | Prerequisite Condition | Probe (+) | Probe (-) |
|---|---|---|---|---|
| Charging System Inspection (V) | Battery voltage is between 8V and 16V |
|
Battery terminal (+) | Battery terminal (-) |
- Is the measured voltage within specifications?
YES
- Go to "POWER CIRCUIT INSPECTION " procedure.
NO
- Check that the fuse, terminal of battery, all terminals of alternator are in good condition and Check for damaged harness and poor connection between alternator and battery.
- Substitute with a known-good alternator and check for proper operation. If the problem is corrected, replace alternator and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.