Power Circuit Inspection
| Item | Normal Value | Prerequisite Condition | Probe (+) | Probe (-) |
|---|---|---|---|---|
| Power Circuit Inspection | Battery voltage is between 8V and 16V |
|
Power terminal of the SRSCM | Chassis ground |
- Is the measured voltage within specifications?
YES
- Go to "GROUND CIRCUIT INSPECTION " procedure.
NO
- Thoroughly check all connectors (and connections) for looseness, bending, corrosion, contamination, deterioration, and/or damage. Repair as necessary and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.