DTC Information And Inspection: DTC Detecting Condition

WARNING: This page is about a different car, the 2022 Hyundai Santa Fe. However, it is still accessible from the selected car via links, so may be relevant.

Item	Detecting Condition	Possible Cause
DTC Strategy	Check the amount of clutch slip	Clutch mechanical fault Clutch actuator stuck off
Enable Condition	The difference between clutch target pressure and actual pressure is less than 3 bar Clutch actual pressure above 10 bar Even number gear engagement Battery voltage above 10V Engine speed above 500 RPM Line pressure over 30 bar
Threshold Value	Clutch target torque greater than 100 N.m and clutch actual torque less than 20 N.m If the difference between engine revs and input shaft speed revs is greater than 1000 RPM
Diagnosis Time	0.5s
MIL	2 driving cycles