LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Santa Fe Calligraphy, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 150 (Double Clutch Transmission System Diagnosis - 2.5T (2 Of 4) (Except HEV)) >> DTC P0901-73: Clutch 1 System - System Stuck Off >> Component Inspection >> Vehicle S/W Management

Vehicle S/W Management

WARNING: This page is about a different car, the 2022 Hyundai Santa Fe. However, it is still accessible from the selected car via links, so may be relevant.
Inspection Condition Inspection Procedure Reference
  1. Start "ON".
  2. Gear Lever position "P".
  3. Vehicle speed 0 km/h.
  4. Battery normal. (10V or higher)
  5. NO DTC
  1. Connect GDS to "Data Link Connector (DLC)".
  2. Select the "Vehicle S/W Management" about related DTC with GDS.
  3. Perform "TCU LEARNING" of vehicle S/W Management.
  4. After final operation, go to "Verification of Vehicle Repair" procedure.
Fig.1 to 6
CAUTION: In case of replacing TCU, Clutch pack, TCU update and TCU learning value is abnormal. Perform following procedures

Fig.1 to 6) Transmission Learning S/W Management Steps.

G14540633Courtesy of HYUNDAI MOTOR AMERICA
G14540634Courtesy of HYUNDAI MOTOR AMERICA
G14540635Courtesy of HYUNDAI MOTOR AMERICA
G14540636Courtesy of HYUNDAI MOTOR AMERICA
G14540637Courtesy of HYUNDAI MOTOR AMERICA
G14540638Courtesy of HYUNDAI MOTOR AMERICA