LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Elantra N Line, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Engine Control System Diagnosis - 2.0L (Except HEV) (1 Of 6)) >> DTC P0108-00: Manifold Absolute Pressure/Barometric Pressure Circuit High Input >> DTC Information And Inspection >> DTC Detecting Condition

DTC Information And Inspection: DTC Detecting Condition

WARNING: This page is about a different variant/trim than selected.
Item Detecting Condition Possible Cause
DTC Strategy
  • Voltage range check
  1. Poor connector connection
  2. Short to battery in signal circuit
  3. Open in ground circuit
  4. Faulty MAPS
  5. Faulty PCM
Enable Condition
  • DTC failure not detected
  • Battery voltage between 11 and 16V
Threshold Value
  • MAPS signal voltage is more than 4.85V
Diagnostic Time
  • 2 seconds
MIL ON Condition
  • 2 driving cycles