LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Elantra N Line, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Engine Control System Diagnosis - 2.0L (Except HEV) (1 Of 6)) >> DTC P000A-00: 'A' Camshaft Position Slow Response Bank 1 >> DTC Information And Inspection >> DTC Detecting Condition

DTC Information And Inspection: DTC Detecting Condition

WARNING: This page is about a different variant/trim than selected.
Item Detecting Condition Possible Cause
DTC Strategy
  • Intake CVVT slow response
  1. Poor connector connection
  2. Oil leak
  3. Engine oil contamination
  4. Faulty intake VFS
  5. Intake VFS filter contamination
  6. Faulty CVVT assembly (intake)
Enable Condition
  • Engine speed is between 450 and 5000 RPM
  • Engine oil temperature (EOT) is between 20°C (68°F) and 120°C (248°F).
  • Camshaft set-point movement is higher than 8° within 1s
  • Camshaft set-point moved higher than 0 times since engine start
  • Battery voltage between 11 and 16V
Threshold Value
  • CAM position movement is less than 2.67° within 1s
Diagnostic Time
  • Immediately
MIL ON Condition
  • 2 driving cycles
scientia non olet · About LEMON Manuals