LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Accent SEL >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Autonomous Emergency Braking System Diagnosis >> DTC C16B2-82: WHL_SPD Checksum/Alive Counter Error >> Wiring Inspection >> Terminal and Connector inspection

Terminal and Connector inspection

  1. Many malfunctions in the electrical system are caused by poor connection. Faults can also be caused by interference from other electrical systems, and mechanical or chemical damage.
  2. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage.
  3. Has a problem been found?

    YES 

    NO 

    • Go to Next procedure.
scientia non olet · About LEMON Manuals