LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2020 >> Sonata SEL >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Idle Stop & Go (ISG) System - 1.6L (Except HEV)) >> Hood Switch >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the hood switch connector (A) after loosening the mounting bolt.
    G14525179Courtesy of HYUNDAI MOTOR AMERICA
  2. Check for continuity between terminals.
G14525180Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals