Component Inspection: Notes
WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
* Check before correction
- Refer to "BCW (BSD) Radar Calibration" in "Vehicle S/W Management ", check the vehicle condition and whether the BCW unit or bracket is deformed (mounting angle, twisted vehicle body, etc.).
- Refer to "Correcting the BCW Angle" in "REPAIR PROCEDURES ", after replacing the BCW unit or bracket, with the bumper removed, use the BCW unit correction tool set to perform angle correction.
- After checking and correcting the BCW unit angle, perform the BCW radar correction procedure.