DTC P2565: Turbocharger Boost Control Position Sensor 'A' Circuit High: Specification
WARNING: This page is about a different variant/trim than selected.
ELECTRIC WASTE GATE ACTUATOR SPECIFICATION
| DC - Motor (EWGA) |
| Supply Voltage Range |
Max Current |
| 9~16 V |
7.05 A ± 15% |
| Position |
Output Voltage [V] |
Operating Angle [°] |
| Mechanical Close end stop Position (MCP) |
4.8 |
0 |
| Electrical Close end stop Position (ECP) |
3.8 |
25.6 |
| Electrical Open end stop Position (EOP) |
1 |
97.2 |
| Mechanical Open end stop Position (MOP) |
0.5 |
110 |
| Item |
Resistance (Ω) |
| Normal Parameter At 20°C (68°F) |
1.44 ~ 1.96 Ω |