leakage inspection in intake system
WARNING: This page is about a different variant/trim than selected.
- Visually/physically inspect Intake system blocked or leakage (First, Inspect contamination, gasket)
- Air cleaner blocked
- Inspect intake hose between turbo charger and ETS. (Blocked or leakage)
- Inspect waste gate valve and Recirculation valve (RCV) control hose blocked/leak/assemble improperly.
- Was a problem found?
YES
- Repair as necessary and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.
NO
- Go to "COMPONENT INSPECTION " procedure.