LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2015 >> Sonata Eco >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 65 (Automatic Transaxle System Diagnosis (HEV)) >> DTC P0705: Transmission Range Sensor Circuit Malfunction >> DTC Inspection >> Monitor GDS Data

Monitor GDS Data

WARNING: This page is about a different variant/trim than selected.
  1. Connect GDS to Data Link Connector (DLC).
  2. Ignition "ON" & engine "OFF".
  3. Select "Current Data" mode and monitor "Inhibitor switch" parameter.
  4. Change a shift lever from P-range to D-range.
  5. Is the Inhibitor switch value changed in specification?

    YES 

    • P0705 can be happened When Shift Cable alignment is not correct between TGS Lever and Transmission Range Sensor. So Do not replace "Inhibitor Switch" and Check the Alignment of Shift Cable.

    NO 

scientia non olet · About LEMON Manuals