LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 1991 >> Scoupe SE, Standard >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension - Rear >> Removal & Installation >> Rear Suspension Assembly >> Installation

Rear Suspension Assembly: Installation

  1. To install, reverse removal procedure. Check upper and lower spring seats for proper installation. Tighten bolts.
  2. Tighten suspension arm nuts and shock absorber bolts to specification with vehicle at normal operating height and with no load. See TORQUE SPECIFICATIONS . Bleed and adjust brakes.


  1. To install, reverse removal procedure. Check upper and lower spring seats for proper installation. Tighten bolts.
  2. Tighten suspension arm nuts and shock absorber bolts to specification with vehicle at normal operating height and with no load. Bleed and adjust brakes.
scientia non olet · About LEMON Manuals