LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 1991 >> Scoupe SE, Standard >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension - Rear >> Torque Specifications

Torque Specifications

TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Elantra & Sonata
Backing Plate-To-Arm Bolt 37-44 (50-60)
Brakeline Nut 10-13 (13-17)
Lateral Rod Mounting Nut
Except Sonata Axle Side 59-74 (80-100)
Sonata Axle Side 74-89 (100-120)
Shock Absorber Lower Nut 59-74 (80-100)
Shock Absorber Upper Nut 18-26 (25-35)
Trailing Arm Mounting Nut 74-89 (100-120)
Wheel Bearing Self-Locking Nut
Elantra (1) 108-145 (150-200)
Sonata 177-221 (240-300)
Excel & Scoupe
Backing Plate-To-Arm Bolt 37-44 (50-60)
Brakeline Nut 10-13 (13-17)
Bump Stop-To-Suspension Arm Nut 13-18 (18-25)
Shock Absorber Bolt 48-59 (65-80)
Suspension Arm End Nut 96-111 (130-150)
Suspension Fixture-To-Body Bolt 65-80 (88-108)
Wheel Bearing Self-Locking Nut 111-148 (150-200)
(1) Wheel Bearing Self-Locking Nut may only be reused if torque required to rotate nut while backing it off is greater than 48 Ft. Lbs. (5.5 N.m).