Auxiliary Air Conditioning Evaporator and Blower Case Replacement - Outboard

Fig 1: Auxiliary Air Conditioning Evaporator and Blower Case - Outboard

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the auxiliary HVAC heater core. Refer to Auxiliary Heater Core Replacement . Disconnect any wiring connectors. Invert the auxiliary HVAC module to access components.
1	Auxiliary A/C Evaporator and Blower Lower Case - Outboard Screw (Qty: 12) NOTE: Refer to Fastener Notice . Tighten: 2 N.m (18 lb in)
2	Auxiliary A/C Evaporator and Blower Lower Case - Outboard Procedure Note the location and routing of the wiring harness to ensure proper reinstallation. When replacing the HVAC case, transfer all necessary components.

Callout

Component Name

Preliminary Procedure

Remove the auxiliary HVAC heater core. Refer to Auxiliary Heater Core Replacement .
Disconnect any wiring connectors.
Invert the auxiliary HVAC module to access components.

Auxiliary A/C Evaporator and Blower Lower Case - Outboard Screw (Qty: 12)

NOTE: Refer to Fastener Notice .

Tighten: 2 N.m (18 lb in)

Auxiliary A/C Evaporator and Blower Lower Case - Outboard

Procedure

Note the location and routing of the wiring harness to ensure proper reinstallation.
When replacing the HVAC case, transfer all necessary components.