LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC - Automatic >> Repair Instructions >> Sun Load Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Sun Load Sensor & I/P Upper Trim Pad
    GM870457Courtesy of GENERAL MOTORS CORP.
  1. Remove the I/P upper trim panel with windshield defroster nozzle grille. Refer to Instrument Panel Upper Trim Panel with Windshield Defroster Nozzle Grille Replacement .
  2. Remove the sun load sensor (2) from the I/P upper trim panel by turning 1/4 turn.
  3. Disconnect the electrical connector from the sun load sensor (3).
scientia non olet · About LEMON Manuals