LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC - Automatic >> Repair Instructions >> HVAC Control Module Replacement >> Removal Procedure

Removal Procedure

    Fig 1: HVAC Control Module & I/P Panel
    GM810847Courtesy of GENERAL MOTORS CORP.
  1. Remove the center instrument panel (I/P) air outlet bezel. Refer to Instrument Panel Center Air Outlet Bezel Replacement .
  2. Remove the screws from the HVAC control module (2).
  3. Depress the HVAC control module tabs (3) and remove the HVAC control module (2) from the I/P (4).
  4. Reposition the HVAC control module (2) from the I/P panel (1).
  5. Disconnect the electrical connectors from the HVAC control module (2).
scientia non olet · About LEMON Manuals