Air Temperature Actuator Replacement - Right Side

Fig 1: Air Temperature Actuator

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: In order to avoid actuator damage, DO NOT apply power to the actuator when it is not installed in the HVAC module. Preliminary Procedure Remove the I/P Carrier. Refer to Instrument Panel Carrier Replacement . Disconnect the electrical connector from the air temp actuator.
1	Air Temp Actuator Screws (Qty: 2) NOTE: Refer to Fastener Notice . Tighten: 1.6 N.m (14 lb in)
2	Air Temp Actuator Procedure: Re-calibrate the air temp actuator. Refer to Actuator Recalibration .

Callout

Component Name

NOTE: In order to avoid actuator damage, DO NOT apply power to the actuator when it is not installed in the HVAC module.

Preliminary Procedure

Air Temp Actuator Screws (Qty: 2)

NOTE: Refer to Fastener Notice .

Tighten: 1.6 N.m (14 lb in)

Air Temp Actuator
Procedure:
Re-calibrate the air temp actuator. Refer to Actuator Recalibration .