Air Temperature Actuator Replacement - Left Side

Fig 1: Air Temperature Actuator

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: In order to avoid actuator damage, DO NOT apply power to the actuator when it is not installed in the HVAC module. Preliminary Procedure Remove the Drivers Knee Bolster. Refer to Driver Knee Bolster Replacement . Disconnect the electrical connector from the air temp actuator.
1	Air Temp Actuator Screws (Qty: 2) NOTE: Refer to Fastener Notice . Tighten: 1.6 N.m (14 lb in)
2	Air Temp Actuator Procedure: Re-calibrate the air temp actuator. Refer to Actuator Recalibration .

Callout

Component Name

NOTE: In order to avoid actuator damage, DO NOT apply power to the actuator when it is not installed in the HVAC module.

Preliminary Procedure

Air Temp Actuator Screws (Qty: 2)

NOTE: Refer to Fastener Notice .

Tighten: 1.6 N.m (14 lb in)

Air Temp Actuator
Procedure:
Re-calibrate the air temp actuator. Refer to Actuator Recalibration .