LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (Steering Wheel & Steering Column) >> Repair Instructions >> Repairing Scratched Wood Steering Wheels >> Repair Procedure

Repair Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the steering wheel. Refer to Steering Wheel Replacement .
  2. Wash the wood section of the wheel with wax and grease remover.
  3. Mask off the non-wood area of the steering wheel.
    4. IMPORTANT: Do NOT sand through the clear.
  4. Sand with 400 grit sand paper first. Finish sanding with 600 grit.
  5. Wash the wood section of the wheel again with wax and grease remover.
  6. Clear coat the steering wheel. Refer to the 2003 GM Approved Refinish Materials Booklet, GM 4901 M-D-2003 (English) or M-D-F2003 (French).
  7. Install the steering wheel. Refer to Steering Wheel Replacement .
scientia non olet · About LEMON Manuals