LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (Bumper System & Fascia) >> Repair Instructions >> Impact Bar Replacement - Front Bumper

Impact Bar Replacement - Front Bumper

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Front Impact Bar & Bolts
GM1751811Courtesy of GENERAL MOTORS CORP.
Impact Bar Replacement - Front Bumper

Callout Component Name
Preliminary Procedure: 
Remove the front fascia. Refer to Front Bumper Fascia Replacement (Yukon)  or Front Bumper Fascia Replacement (Escalade)  or Front Bumper Fascia Replacement (Tahoe)  or Front Bumper Fascia Replacement (Avalanche)  or Front Bumper Fascia Replacement (Z71) .
1 Front Impact Bar Bolts (Qty: 2)
NOTE: Refer to Fastener Notice .

Tighten:  160 N.m (118 lb ft)

2 Front Impact Bar