LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Tie Bar Replacement - Upper

Tie Bar Replacement - Upper

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Upper Tie Bar & Components
GM1772599Courtesy of GENERAL MOTORS CORP.
Tie Bar Replacement - Upper

Callout Component Name

Preliminary Procedures

  1. Remove the radiator grille reinforcement support. Refer to Support Replacement - Radiator Grille Reinforcement .
  2. Remove the radiator support diagonal brace. Refer to Brace Replacement - Radiator Support Diagonal .
  3. Remove the upper fan shroud bolts. Refer to Cooling Fan and Shroud Replacement .
  4. Remove the upper radiator bolts. Refer to Radiator Replacement .
  5. Remove the upper condenser bolts. Refer to Condenser Replacement .
1 Upper Tie Bar Bolts (Qty: 6)
NOTE: Refer to Fastener Notice .

Tighten:  9 N.m (80 lb in)

2 Upper Tie Bar Brace Bolts (Qty: 2)

Tighten:  25 N.m (18 lb ft)

3 Upper Tie Bar