LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Hood Link Replacement

Hood Link Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Hood Hinge Spring & Bolt
GM1670886Courtesy of GENERAL MOTORS CORP.
Hood Link Replacement

Callout Component Name
CAUTION: When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.
Preliminary Procedure: Remove the hood. Refer to Hood Replacement .
1 Hood Hinge Spring Bolt
NOTE: Refer to Fastener Notice .

Tighten:  25 N.m (18 lb ft)

2 Hood Hinge Spring