Hose Replacement - Windshield Washer

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Windshield Washer Pump Hose Assembly & Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Open the hood. Remove the left front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement . Disconnect the washer hose from the washer pump spout.
1	Windshield Washer Hose Retainer Clip
2	Windshield Washer Nozzle Hose Tip: Disconnect the hose at the left rear fender flange.
3	Windshield Washer Pump Hose Assembly Tip: Route the new hose in the same location as the old hose was removed from.