Radio Antenna Cable Extension Cable Replacement (Avalanche/Escalade EXT)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Radio Antenna Extension Cable Assembly

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the instrument panel upper trim pad. Refer to Instrument Panel Upper Trim Panel with Windshield Defroster Nozzle Grille Replacement (Cadillac) or Instrument Panel Upper Trim Panel with Windshield Defroster Nozzle Grille Replacement (Except Cadillac) . Remove the radio. Refer to Radio Replacement (Cadillac) or Radio Replacement (Except Cadillac) . Remove the instrument panel center trim panel. Refer to Trim Panel Replacement - Instrument Panel (I/P) Center (Cadillac) or Trim Panel Replacement - Instrument Panel (I/P) Center (Except Cadillac) .
1	Radio Antenna Extension Cable Assembly Tip: Disconnect the extension cable from the antenna. Disconnect the extension cable from the radio. Disconnect the extension cable from the center HVAC duct.

Callout

Component Name

Preliminary Procedure

Remove the instrument panel upper trim pad. Refer to Instrument Panel Upper Trim Panel with Windshield Defroster Nozzle Grille Replacement (Cadillac) or Instrument Panel Upper Trim Panel with Windshield Defroster Nozzle Grille Replacement (Except Cadillac) .
Remove the radio. Refer to Radio Replacement (Cadillac) or Radio Replacement (Except Cadillac) .
Remove the instrument panel center trim panel. Refer to Trim Panel Replacement - Instrument Panel (I/P) Center (Cadillac) or Trim Panel Replacement - Instrument Panel (I/P) Center (Except Cadillac) .

Radio Antenna Extension Cable Assembly
Tip:

Disconnect the extension cable from the antenna.
Disconnect the extension cable from the radio.
Disconnect the extension cable from the center HVAC duct.