Garnish Molding Replacement - Rear Door Frame

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Rear Side Door Window Garnish Molding & Retainers

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures: Remove the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement (Suburban/Yukon XL/Escalade ESV) or Rear Side Door Trim Panel Replacement (Tahoe/Yukon/Escalade) .
1	Rear Side Door Window Garnish Molding Retainer (Qty: 7)
2	Rear Side Door Window Garnish Molding Tip: Install the 2 lower clips to the window flange between the corners. Install the 2 side clips to the window flange between the corners. Install the remaining 3 clips around the window flange.